Changing The Metronome's Time Signature; Adjusting The Metronome's Volume - Roland LX-10F Owner's Manual

Changing the Metronome's Time Signature

1.
Press the [Metronome] button.
The metronome will sound.
2.
Press the [Song] (Tempo) button.
The [Song] (Tempo) button will light orange, and the display will indicate the time
signature.
3.
Press the [-] or [+] button.
If you specify "0/4" only the weak beats will sound.
If you record your performance, it will be recorded with the time signature you specify here.
When you play back a song, the metronome's time signature will be set to the time signature of that song.
Available time signatures
You can change the way in which the metronome's beats are sounded (p. 57).
* You can't change the metronome's time signature while a song is playing.

Adjusting the Metronome's Volume

fig.Panel
1.
While holding down the [Metronome] button, press the [-] or [+]
button.
The display will indicate the metronome's volume.
If you set the metronome's volume to "0" the metronome will not sound.
Metronome volume range
3
2/2, 0/4, 2/4, 3/4, 4/4, 5/4, 6/4, 7/4, 3/8, 6/8, 9/8, 12/8
0–10
2 1
Performing
23