Listening To Demo Songs - Roland LX-10F Owner's Manual

Listening to Demo Songs

The LX-10F comes with demo songs.
* You won't be able to play back demo songs if there is an unsaved performance. You'll need to either delete or save your performance
before playing demo songs (p. 42).
1.
Hold down the [Twin Piano] button and press the
[Function] button.
The indicators of the four tone buttons, the [Twin Piano]
button, the [Piano Designer] button, and the [Function]
button flash.
Button with tone demo Demo content
[Piano] Piano tone demo song
[E. Piano] E. Piano tone demo song
[Strings] Strings tone demo song
[Others] Demo song using Guitar tones
Demo songs using the Piano
[Piano Designer]
Designer function (p. 34) to
demonstrate varieties of sounds
* All rights reserved. Unauthorized use of this material for
purposes other than private, personal enjoyment is a
violation of applicable laws.
* No data for the music that is played will be output from MIDI
Out.
2.
Press one of the Tone buttons.
The songs will play consecutively, starting with the demo
song you selected. The button for the song currently being
played back flashes on and off.
When playback of the last song is reached, playback
continues by returning to the first song and playing that
again.
3.
To stop playback, press the blinking button.
4.
Press the [Twin Piano] button to exit Demo mode.
The indicators of the four tone buttons, the [Twin Piano]
button, the [Piano Designer] button, and the [Function]
button will return to their original state.
2
1
Listening to the Piano Designer demo songs
1.
In step 2, press the [Piano Designer] button.
The piano designer demo screen will appear.
2.
Press the [▲] or [▼] button to select the type
of demo.
3.
Press a blinking tone button.
The demo song for the button you pressed will play.
You can repeat steps 2 and 3 to hear other demo
songs.
Before You Play
19