Table of Contents
Advertisement
Recording Your Performance
5.
Press the [
You'll hear a two-measure count, and then recording will begin.
Alternatively, you can start recording by playing the keyboard instead of pressing the [
be no count-in.
When recording begins, the [
* If you record additional material without erasing the previously recorded performance, the song's tempo and time signature
will remain as they were when first recorded.
6.
To stop recording, press the [
When you re-record
If you re-record from the beginning, the previously recorded performance will be erased as the new recording
proceeds.
If you want to record an entire performance, erase the previously recorded performance first (p. 43).
fig.zu
Listening to the recorded performance
fig.Panel
1.
Press the [
You'll return to the beginning of the recorded performance.
2.
Press the [
The recorded performance will play back.
Press the [
50
] button.
] button and [
During the count, "-2" then "-1" will be shown as the measure number in the lower right of the
screen.
] button.
1st Pass
2nd Pass
] button.
] button.
] button once again to stop playback.
Your recorded performance will be lost when you turn off the power. If you want to keep your recorded
performance, you must save it to internal memory (p. 44) or USB memory (p. 64).
You can't play back another song if a recorded performance exists. Erase or save your recorded
performance, and then play back the desired song (p. 42).
By holding down one of the track buttons and pressing the [
performance of just that track. If you erase the performance from all tracks, the display will indicate
"New Song."
] button will light.
The first Performance is preserved
1
] button, you can erase the
] button. In this case, there will
2
Advertisement
Table of Contents
