Programming The Thermostat; Reset To Energystar; Events Per Day - Robertshaw 9801i2 User Manual

110-1175 English 7/17/06 1:59 PM

PROGRAMMING THE THERMOSTAT

Your thermostat has been preprogrammed with a schedule of setpoints
recommended by EnergyStar (www.energystar.gov). This schedule is designed
to lower your energy costs year-round.
If you changed the schedule and want to return to the EnergyStar schedule, you
can do that at any time by selecting Menu, Schedule, Reset to EnergyStar.
From the main screen, select Menu.
Main Menu
Fan
Schedule
Time & Day
Comfort Settings
Select
Back
Schedule Menu
Program
Events/Day

Reset to EnergyStar

Back
Page 12
About EnergyStar ®
From the Main Menu, select Schedule.
Your schedule is based on the number of events you want each day. Each event includes a time of
day, heating and cooling setpoint, fan setting, and sensor setting. (Sensor setting only appears when a
remote sensor is installed.) There can be two, four, or six events per day.
You can change how many events per day by selecting Events/Day.
4
In the following programming example, the Schedule Menu shows the default of four events
per day.
Select
page 1 of 2
EnergyStar ® Event Setpoints
Winter Summer
(Heating) (Cooling)
Morning 70°F (21°C) 78°F (25°C)
Day 62°F (17°C) 85°F (29°C)
Evening 70°F (21°C) 78°F (25°C)
Night 62°F (17°C) 82°F (28°C)
12