Using Communication Function; Handling Possible Data - JUKI Sewing Machine Instruction Manual

16. uSING CoMMuNICatIoN FuNCtIoN

Communication function can download the sewing data created with other sewing machine, creation of
sewing data and sewing data created by editing device PM-1 to the sewing machine. In addition, the
function can upload the aforementioned data to the media or personal computer.
Media and RS-232C port are prepared as the means to communicate.

16-1 Handling possible data

Handling possible sewing data are two kinds below. The respective data formats are as described below.
Data name
Vector format data
Parameter data
In case of saving the data in the media, save the data in the state of directory structure below.
When the data are not saved in the correct folder, reading of file cannot be performed.
Media drive
there is beforehand the ProG folder in the media purchased from our company. Do not
delete it.
Pictograph Extension
VD00
DP00
Save parameter
data (exclusive for
DP).
Data of the needle entry point created with
PM-1
Format of the data which can be used in
.vdt
common among JUKI sewing machines.
Format of the data of sewing proper to DP
such as number of steps, length of step,
.epd
shirring amount, thread tension value, etc.
created with the sewing machine
VData
Save vector
format data.
DP2100
134
– –
Description of data
: file No.
VD00 .vdt
VD00 .vdt
VD00 .vdt
DP00 .epd
DP00 .epd
DP00 .epd