JUKI Sewing Machine Instruction Manual page 121

2) Level 2
Memory switch data (level 2) can be edited when pressing MODE switch for as long as 6 seconds.
No.
Presser position after thread trimming selection
Position of the presser after thread trimming is set.
: DOWN
Max. sewing speed setting
Max. sewing speed of the sewing machine is set.
Sewing speed at low speed setting
Min. sewing speed of the sewing machine is set.
Sewing speed of thread trimming setting
Sewing speed at the time of thread
This function is set when hand lamp flickers.
0 : Without flicker reduction function
1 : Less effective / 8 : more effective
rotation start pedal stroke setting
Stroke from the neutral position of pedal to sewing
machine rotation start position is set.
Pedal low speed section
Section from pedal neutral position to sewing
machine acceleration start position is set.
Pedal presser lifting start position
Section from pedal neutral position to cloth
presser lifting start position is set.
thread trimming start pedal stroke
Section from pedal neutral position to thread
trimming start position is set.
Pedal max. number of rotation reach stroke
Section from pedal neutral position to max. num-
ber of rotation reach position is set.
Pedal neutral position compensation
Compensation value of neutral point of pedal
is set.
auto-lifter lifting holding time
Waiting time of lifting the presser lifter is set.
Pedal curve selection function
Curve of the number of rotation of the sewing machine in
terms of pedal depressing amount is selected.
0 : Straight line
2 : Square root
Number
of
0
rotation
Item
2
1
Pedal stroke
115
–
Setting range
– – –
: UP
200 to
3500
200 to 400
100 to 250
0 to 8
1.0 to 5.0
1.0 to 10.0
– 1.0 to –
6.0
– 1.0 to –
6.0
1.0 to 15.0
– 15 to 15
10 to 600
– – –
1 : Square
–
Edit unit Initial display
– – – UP
10sti/min 3500sti/
min
5sti/min 200sti/min
5sti/min 160sti/min
1 0
0.1mm 3.0mm
0.1mm 6.0mm
0.1mm – 2.1mm
0.1mm – 5.1mm
0.1mm 15.0mm
1 – 1
10sec 60sec
– – – Straight
line