JUKI Sewing Machine Instruction Manual page 153

4) Input the number of times of thread trimming.
Next, input the number of times of thread
trimming per process.
When number of times of thread trimming button
5 in the previous page is pressed, the
number of times of thread trimming input screen
is displayed.
Input the value you desire with ten keys or UP/
DOWN buttons.
After the input, press ENTER button
* When the input value is "0", count of the
6
number of times of thread trimming is not
performed. use this function by connecting
the external switch.
5) Start the count of number of pieces of
production.
When START button
count of number of pieces of production is
started.
9
7
6) Stop the count.
Display the production control screen referring
"17-4 observing the production control
to
information".
When the count is being performed, STOP
switch
8 is pressed, the count is stopped.
A f t e r t h e s t o p , S TA RT b u t t o n
displayed at the position of STOP button. When
continuing the count, press START button again.
The counted value is not cleared until CLEAR
8
button
147
– –
7 is pressed, the
8 is displayed. When STOP button
9 is pressed.
6 .
7 i s