Preparation Before Operation; Attaching The Needle; Threading The Needle-Thread - JUKI Sewing Machine Instruction Manual

4. PrEParatIoN BEForE oPEratIoN

4-1 attaching the needle

WarNING :
turn oFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine.
1

4-2 threading the needle-thread

WarNING :
turn oFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine.
* Pass thread in
the order of 1
through !3 as
!0
shown in the
illustration.
D
B
A
C
2
9
3
!3
12
–
1) Turn the handwheel until the needle bar reaches
the highest point of its stroke.
2) Loosen screw 2 , and hold needle 1 with its
indented part A facing exactly to the right in
direction B .
3) Insert the needle fully into the hole in the needle
bar in the direction of the arrow until the end of
hole is reached.
4) Securely tighten screw 2 .
5) Check that long groove C of the needle is facing
exactly to the left in direction D .
1
2
4
8
6
5
7
!1
!2
A
–
Note) Do not
pass this
part to
section A .