JUKI Sewing Machine Instruction Manual page 108

3
4
Similarly, set the value of LV.2, LV.3, LV.4 and LV.5.
Display A in the screen shows as follows :
• When shirring amount is – 4 to 5, auxiliary feed shirring amount value is 0%.
• When shirring amount is 6 to 10, auxiliary feed shirring amount value is 10%.
• When shirring amount is 11 to 15, auxiliary feed shirring amount value is 25%.
• When shirring amount is 15 to 20, auxiliary feed shirring amount value is 30%.
• When shirring amount is 21 to 35, auxiliary feed shirring amount value is 35%.
* When inputting ratio (%), the set value is corrected by 5% unit.
3) Perform the auxiliary feed interlock mode set-
ting.
1. Press SHIRRING AMOUNT RANGE SETTING
button
value of shirring amount range of LV.1 with ten
a
keys
5
When inputting the minus numeral in
the ten key pop-up screen, press the
6
minus button after inputting "0" and
input the numeral.
2. Next, press AUXILIARY FEED SHIRRING
AMOUNT SETTING button
input auxiliary feed shirring amount value of LV.1
with ten keys
4) Press ENTER button
7
5) Press CANCEL button
102
– –
3 of LV.1 and input the upper limit
5 .
4 of LV.1 to
5 .
6 .
7 .