Adjusting The Contrast Of The Operation Panel Screen; Connection Of The Production Support Switch - JUKI IP-110 Type F Instruction Manual

5-2. adjusting the contrast of the operation panel screen

2
A

5-3. connection of the production support switch

3
2
A
Light
Shade
3
1
1
) Press � the drecto� of arrow mark the clck of
secto� A of cord outlet cover 2 assembled �
the rear of operato� pa�el 1 a�d remove the
cover.
2) Tur� LCD scree� dsplay brght�ess adjustme�t
varable resstor 3 to adjust the brght�ess (co�-
trast) of LCD scree�.
1. to prevent the operation panel from
breakage, do not touch the circuit board
pattern and the connector terminal.
2. Do not disassemble the operation pan-
el to prevent it from breakage.
) Press � the drecto� of arrow mark the clck of
secto� A of cord outlet cover 2 assembled �
the rear of operato� pa�el 1 a�d remove the
cover.
2) Co��ect the opto�al ju�cto� cable co��ector to
co��ector CN05 3 of the producto� support
swtch.
Note) Prepare the switch main unit by the
customers or ask JuKI business office
about it.
optional relay cable a (asm.)
JuKI Part No. 40008168
3 2 1
cN105
+ 5v 1
2
Sw
GND 3
- 6 -