No. Of Pcs. Counter; Re-Sewing Switch - JUKI IP-110 Type F Instruction Manual

7. No. oF PcS. couNtEr

No. oF PcS. couNtEr
The No. of pcs. counter counts up the number of finished products every time the machine performs thread
trmm�g. (0 →  → 2 ........... → 9999)
2

8. rE-SEwING SwItcH

rE-SEwING SwItcH
The re-sew�g swtch s used whe� the bobb� thread ru�s out dur�g the programmed sttch�g patter�
sew�g steps or the lke.
1
D
c
Step 4
B
a
Step 1
d
Step 2
3
4
Step 3
e
b c
a
The value on the No. of pcs. counter can be modified
us�g cou�ter value sett�g swtches 3 a�d 4 . The
value o� the No. of pcs. cou�ter s reset to "0" by
press�g cou�ter reset swtch 2 .
) The bobb� thread ru�s out dur�g the operato�s
steps for sew�g. a
2) Br�g the pedal to ts �eutral posto� to make the
sew�g mach�e stop. Now, depress the back part
of the pedal to make the thread trmmer actuate. b
3) Tur� ON re-sew�g swtch 1 . c
4) Replace the bobb�. Slghtly feed the materal o�
the mach�e � the reverse drecto� to retur� the
materal to the posto� where the sew�g was �ter-
rupted to allow the sew�g mach�e to sew over the
finished seam in step 2. d
5) Depress the fro�t part of the pedal u�tl stop pos-
to� e of step 2 s reached.
6) Tur� ON re-sew�g swtch e aga� at posto� 1
where the sew�g has bee� �terrupted, a�d the �ext
step wll be �dcated o� the operato� pa�el. Now,
you ca� re-start sew�g of the programmed sttch�g
patter�.
* �f the �eedle thread breaks or a�y other trouble oc-
curs, whch s caused by re-sew�g swtch 1 dur-
�g the operato� steps ( d → e ) � the free sew�g
mode, br�g the pedal to ts �eutral posto�, The�
depress the back part of the pedal to actuate the
thread trmmer. Thread the mach�e head a�d slghtly
feed the materal � the reverse drecto�, a�d press
re-sew�g swtch 1 . Ths e�ables the sew�g mach�e
to co�t�ue the sew�g u�der the free sew�g mode.
The� operate the operato� pa�el as descrbed � the
aforeme�to�ed steps 5) a�d 6).
To return to the first step of the programmed
stitching pattern without using re-sewing
switch 1 , depress the back part of the pedal
to actuate the thread trimmer. this makes the
operation panel give the step indication 1.
Now, you can start sewing from the first step
of the programmed stitching pattern.
- 9 -