Programming Automatic Thread Cutting; Checking Properties Of A Pattern Combination - Janome Horizon Memory craft 7700 QCP Instruction Book

1
2
1

Programming Automatic Thread Cutting

To cut the threads automatically after sewing the pattern
combination, press the automatic thread cutter key after
programming the pattern combination.
The cutter sign will be indicated on the LCD screen and
the LED signal on the thread cutter button will turn on.
1 Cutter sign
2 LED signal
The machine will sew the pattern combination and cut the
threads, then stop automatically.
NOTE:
If you wish to cut the threads automatically after sewing
the desired pattern, press the automatic thread cutter
button after selecting the desired pattern.
When a pattern in the buttonhole group is selected, the
machine will cut the threads and stop automatically after
the pattern is completed.
When a pattern in any other group is selected, pressing
the auto-lock button or reverse button will cause the
machine to cut the threads and stop automatically.

Checking Properties of a Pattern Combination

You can check the total length, number of patterns and
2
stitch count of a pattern combination.
1 Total length in centimeters and inches
2 Number of patterns
3
3 Total stitch counts
If you wish to sew a series of pattern 244 within a span of
20 cm (8"), memorize one unit of pattern 244 and press
the pattern icon on the LCD screen.
The length of the single pattern will be shown.
Calculate how many number of patterns are required and
memorize the required number of patterns.
Check the total length of the pattern combination and
adjust the number of the patterns if necessary.
Select the locking stitch
The machine will sew the memorized number of patterns
and stop automatically.
76
and press the memory key.