Programming The Pattern Combination; Programming Auto-Thread Cutting - Janome 4120QDC Instruction Manual

Janome 4120QDC Sewing Machine Instruction Manual
z x
c
v
b
n
z x c
www.janomeflyer.com

Programming the Pattern Combination

Example: Patterns #63, #65 and #64 (mode 3)
z Select pattern 63 (mode 3).
x Press the memory key, and the stitch pattern 63 is
memorized.
c The LCD display shows only 1 character at a time.
The memorized stitch pattern is shifted to the left side
of the display and the cursor blinks.
v Select pattern 65 (mode 3). Press the memory key.
b Select pattern 64 (mode 3). Press the memory key.
n A pattern combination series will be sewn. If you press
the auto-lock button q while the machine is sewing,
the machine will sew the current pattern and locking
stitch, then stop automatically.
NOTE:
q
Stitch patterns can be memorized up to 50 patterns.

Programming Auto-thread Cutting

Example: Auto-thread Cutting with Patterns #63, #65
and #64 (mode 3)
z Refer to procedure z to b on "Programming the
Pattern Combination" above to enter the stitch
patterns 63, 65 and 64.
x Press and hold the thread cutter button until the
thread cutter mark appears on the LCD display.
c Start sewing. A pattern combination series will
be sewn and the machine will trim the threads
automatically after locking stitch.
50
4120QDC Owners Manual/ User Guide