Programming Automatic Thread Cutting - Janome Horizon Instruction Book

q
r

Programming Automatic Thread Cutting

To cut the threads automatically after sewing the pattern
combination, press the auto thread cutter key after
programming the pattern combination.
The cutter sign will be indicated on the LCD screen and
the LED signal on the thread cutter button will turn on.
q Cutter sign
w LED signal
e Auto thread cutter key
e
z Select pattern 147.
w
x Press the memory key.
c Select pattern 151.
v Press the memory key.
b Press the auto thread cutter key.
n Start sewing.
The machine will sew the pattern combination,
auto-lock stitch and cut the threads, then stop
automatically.
NOTE:
If you wish to cut the threads automatically after
sewing the desired pattern, press the auto thread
cutter key after selecting the desired pattern.
When a pattern in the buttonhole group is selected,
the machine will cut the threads and stop automatically
after the pattern is completed.
r Buttonhole group
When a pattern in any other group is selected,
pressing the auto-lock button or reverse button
will cause the machine to cut the threads and stop
automatically.
Patterns 8 and 34 cannot be used for the auto thread
cutting.
85