Disengaging The Dual Feed Device; Removing The Dual Feed Foot - Janome Horizon Memory craft 7700 QCP Instruction Book

z
1
x
c
z
1
x
c
3
2
3
2
4

Disengaging the dual feed device

z Raise the presser foot lifter to the extra lifted
position.
1 Extra lifted position
x Pull down the dual feed device to disengage it
from the dual feed foot. Swing the dual feed
device to the rear.
2 Dual feed device
c Swing up the dual feed device until it catches the
pins.
3 Pin

Removing the dual feed foot

z Loosen the thumbscrew with the screwdriver.
1 Thumbscrew
x Raise the presser foot and loosen the thumbscrew
to remove the dual feed foot.
2 Dual feed foot
c Attach the foot holder to the presser bar and
tighten the thumbscrew lightly. Lower the presser
foot and tighten the thumbscrew securely with the
screwdriver.
3 Foot holder
4 Presser bar
13