Eyelet - Janome Horizon Memory craft 7700 QCP Instruction Book

1

Eyelet

Machine settings
Pattern:
Thread tension:
Presser foot:
Foot pressure:
The eyelet is used for belt holes etc.
Sewing
Sew until the machine stops automatically.
Open the eyelet with an eyelet puncher or pointed
scissors.
Adjusting the shape of an eyelet
Correct the shape of the eyelet as follows:
If the eyelet gap opens, press "–" on the stitch length
adjusting button.
If the eyelet overlaps, press "+" on the stitch length
adjusting button.
NOTE:
The shape can be adjusted within L1 to L3 (default
setting is L2).
2
63
38-40 (Buttonhole)
AUTO
Satin stitch foot F
7
1 Eyelet gap opens
2 Eyelet overlaps