Inserting Bobbin - Janome Sewing Machine Instruction Book

1
2
1
3
4

• Inserting bobbin

Place a bobbin in the bobbin case, making
1
sure the thread feeds clockwise from the
bobbin.
Draw the thread through the slot of the bobbin
2
case.
Continue to draw the thread under the
3
tension spring and through the opening.
Pull out about 4˝ (10 cm) of thread.
Tension spring
1
Holding the latch open, position the bobbin
4
case into the shuttle, and then release the
latch.
The case should lock into place when the
latch is released.
14