To Use The Port Replicator - HP Omnibook XE3 Evaluator Manual

CAUTION
Note
Making Connections
Connecting External Components
To disable TV
Different models of the notebook PC disable TV mode in different ways.
To return the system to normal LCD display mode, click the television icon in the system
tray and do one of the following, depending on your PC model:
Click LCD.
OR
Click the TV option to deselect it.
OR
Click Start, Settings, Control Panel, Display (Windows 98 or 2000) or Start, Control
Panel, Appearance and Themes, Display (Windows XP). On the Settings tab, click
the Advanced button and disable the TV display.
Selecting Exit from the monitor or display icon pop-up menu removes the icon
from the system tray. If you do this, you can access the TV settings from the
Control Panel as described in the above steps.
Restart the computer to restore the television icon.

To use the port replicator

(On models provided with a docking connector.) With the optional port replicator, you
can connect external components—and then avoid disconnecting and reconnecting them
each time you take the computer on the road. You can find additional information about
the port replicator in the manual that comes with it.
The port replicator does not come with its own AC adapter. You use the AC adapter
from the notebook PC to power the PC and the port replicator together.
To connect to the port replicator
1. Plug in the AC adapter to house power, then connect it to the rear of the port
replicator. Make sure that the AC status light is on.
82 Corporate Evaluator's Guide