To Use The Port Replicator - HP Pavilion n5000 - Notebook PC Reference Manual

Note
Note
You can adjust the TV display by following these steps:
1. Click Start, Settings, Control Panel, Display.
2. Select Settings tab and click Advanced.
3. Select S3DuoVue tab and click TV. If the TV option is grayed out, reboot the system
with the TV powered on and the connector attached, then select TV in the S3DuoVue
tab again.
4. To center the display in the TV set or to adjust other settings, click Settings under the
TV graphic.
5. The TV Type for your country is automatically detected. (If it is incorrect, select the
correct type: NTSC is used in North and South America, except for Argentina and
Brazil; NTSC/Japan in Japan, South Korea, and Taiwan; and PAL in most other
countries.)
It may be necessary to change the TV settings in the BIOS Setup utility. To do this,
reboot your computer and when you see the HP logo, press F2 to start the BIOS Setup
utility. Then select the appropriate television type in the Main settings page of the BIOS
Setup.
To disable TV
To return the system to normal operation, click the monitor or display icon in the system
tray and deselect the TV option.
Selecting Exit from the monitor or display icon pop-up menu removes the icon from the
system tray. If you do this, you will have to access the TV settings from the Control
Panel as described in the above steps.

To use the port replicator

(On models provided with a docking connector.) With the optional port replicator, you
can connect external components—and then avoid disconnecting and reconnecting them
each time you take the computer on the road. You can find additional information about
the port replicator in the manual that comes with it.
Making Connections
Connecting External Components
Reference Guide 77