To Install Touchpad Support; To Install The Intel® Speedstep™ Applet - HP Omnibook XE3 Evaluator Manual

Using Windows 98
Installing Retail Windows 98 Second Edition

To install touchpad support

If a retail version of Windows 98 Second Edition is installed, the touchpad support must
be added. This driver is located on the Recovery CD in \HP\DRIVERS\TOUCHPAD.
1. Double-click \HP\DRIVERS\TOUCHPAD\SETUP.EXE on the Recovery CD.
2. Choose the appropriate language, then click OK.
3. Click Next in the Welcome window, then Next to accept the Default Directory.
4. Click Next to accept Current Settings.
5. Remove the Recovery CD and click Finish to complete the setup and reboot the
HP notebook.
To install the Intel® SpeedStep™ applet
If you've installed a retail version of Windows 98, you'll need to install the Intel®
SpeedStep™ Technology applet if you have a dual-speed Pentium III processor.
The Intel SpeedStep files are located on the Recovery CD in \HP\DRIVERS\SPEEDSTP.
1. Double-click \HP\DRIVERS\SPEEDSTP\SETUP.EXE.
2. Click Next in the "Welcome" window.
3. Remove the Recovery CD and click Finish to complete the setup and reboot the
HP notebook.
120 Corporate Evaluator's Guide