Table of Contents
Advertisement
INSTALLATION
11) Mount the cast faceplate panels onto the insert body, sliding the
side fi ller brackets into the space between the glass and the fi rebox.
Secure using the 4 remaining black screws, 2 per side.
U31 ONLY:
Install the glass trim by inserting the side hooks on the glass trim
into the 4 slots between the faceplate and the glass. Push the
glass trim down fi rmly with both hands to lock into place.
Side Hook
®
12) To put on the Hampton
logo, peel the sticker from the back of the
logo and place it centered on the bottom left hand corner of the
faceplate.
®
Hampton
Logo
20
Slide side fi ller bracket
into gap between
glass and fi re box.
Slots
Left Side
Faceplate
HAMPTON
GRILL INSTALLATION
Before the grills are installed, a grill stop bracket needs to be put in
place.
1) The U32 grill stop bracket is installed in the bottom left corner just
under the fi rebox as shown below.
2) Place top grill into brackets located inside top of fi rebox as shown.
Bracket
Top Grill
Note: The top grill should be placed with the curved
cut-out facing up.
3) The bottom grill, shown in the diagram below, has 2 hinges that are
attached to the lip on the bottom of the unit. Secure using 2 screws
per hinge.
®
CAST
U32
Grill
Stop
Bracket
Bracket inside
top of fi rebox.
U32-4 FPI Direct Vent Gas Insert
Advertisement
Table of Contents
