Fujitsu Eternus DX80 S2 User Manual page 60

Chapter 5 Installing Optional Products
5.1 Installing Drives
4-2
4-3
4-4
5
6
7
8
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Insert the drive all the way into in the slot, making sure that it is firmly seated and
keeping the lock lever open.
WARNING
Swing the lock lever in the direction of the arrow, until the lock clicks shut.
Check that the newly installed drive's DRIVE READY LED lights up green.
Repeat Step 3 and Step 4
Remove the wrist strap.
In the [Disks] screen of [Component] on the ETERNUS Web GUI screen, check
that the added drives are recognized.
Set up RAID groups, volumes, hot spares, and Host Affinity settings on the new
drives, as required.
Copyright 2011 FUJITSU LIMITED
Do
• Hold the drive with both hands to protect against jarring.
for each additional drive.
60
Lock lever
End of procedure
P3AM-4842-01ENZ0