Figure 1.8 Drive Slot Numbers (2.5" Type Controller Enclosure); Figure 1.9 3.5" Drive; Figure 1.10 Drive Slot Numbers (3.5" Type Controller Enclosure); Table 1.2 Status And Meanings Of Each Led (Drive) - Fujitsu Eternus DX80 S2 User Manual

Chapter 1 Components
1.1 Controller Enclosure
Figure 1.8
Figure 1.8
●
3.5" drives
Figure 1.9
Figure 1.10

Figure 1.10 Drive slot numbers (3.5" type controller enclosure)

●
Part explanation
• LEDs
The states of LEDs are listed below.
Table 1.2
DRIVE READY
DRIVE FAULT
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
shows the slot number of each drive.
Drive slot numbers (2.5" type controller enclosure)
DRIVE READY LED
DRIVE FAULT LED
3.5" drive
shows the slot number of each drive.
Slot#8
Slot#4
Slot#0
Status and meanings of each LED (drive)
LED name LED status
(green)
(blinks green)
(orange)
Copyright 2011 FUJITSU LIMITED
Slot#9 Slot#10
Slot#5
Slot#6
Slot#1 Slot#2
Drive status
The drive is in normal status.
•
The drive is in error status.
•
In response to commands from Microsoft
Virtual Disk Service (VDS) or ETERNUS CLI,
the location of the drive is identified.
16
Slot#11
Slot#7
Slot#3
P3AM-4842-01ENZ0