Additional Information - Fujitsu Eternus DX80 S2 User Manual

Disk storage system
Hide thumbs Also See for Eternus DX80 S2:
Table of Contents

Advertisement

About this Manual
How Warnings are Presented in this Manual
A message is written beside the symbol indicating the caution level. This message is marked
with a vertical ribbon in the left margin, to distinguish this warning from ordinary descriptions.
An example is shown here.
Example Warning

Additional Information

Symbols Used in This Manual
The following is a symbol used throughout this manual:
Abbreviations Used in This Manual
"ETERNUS DX Disk storage system" refers to the DX80 S2/DX90 S2 Disk storage system.
"CA" refers to the host interface module used in the ETERNUS DX Disk storage systems to
connect to the server.
"Host Bus Adapter (HBA)" refers to the interface module normally used by the server to
connect to the ETERNUS DX Disk storage systems. "Interface module" may be referred to as
"FC card", "LAN card", "Network Interface Card (NIC)", "Converged Network Adaptor (CNA),
or "SAS card" depending on the type of server and interface that are used.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Warning Level Indicator
Warning Type Indicator
Warning Details
To avoid damaging the ETERNUS DX80 S2/DX90 S2
Disk storage system, pay attention to the following points when cleaning
the ETERNUS DX80 S2/DX90 S2 Disk storage system:
- Make sure to disconnect the power when cleaning.
- Be careful that no liquid seeps into the ETERNUS DX80 S2/DX90 S2
Disk storage system when using cleaners, etc.
- Do not use alcohol or other solvents to clean
the ETERNUS DX80 S2/DX90 S2 Disk storage system.
Warning Layout Ribbon
Functions and know how which can be useful when setting up or operating
the ETERNUS DX80 S2/DX90 S2 Disk storage system.
6
Copyright 2011 FUJITSU LIMITED
P3AM-4842-01ENZ0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eternus dx90 s2

Table of Contents