Automatic Off-Hook Call Placement; Call Hold - Polycom SIP 3.0.2 Administrator's Manual

Configuration file:
Central
phone1.cfg
(boot server)

Automatic Off-Hook Call Placement

Configuration file:
Central
phone1.cfg
(boot server)

Call Hold

For the bitmaps, enter a bitmap filename and put the file on the boot
d
server. For example:
bg.gf.gray.3.name="polycom.bmp"
The default size for bitmaps is 320 x 160. Smaller bitmaps will be
centered and a white border added. Larger bitmaps will be centered
and cropped to fit.
Save the modified sip.cfg configuration file.
e
Configuration changes can performed centrally at the boot server:
Specify which backgrounds will be displayed.
For more information, refer to
•
The phone supports an optional automatic off-hook call placement feature for
each registration.
Configuration changes can performed centrally at the boot server:
Specify which registrations have the feature and what contact to call
when going off hook.
For more information, refer to
•
<autoOffHook/>
The purpose of hold is to pause activity on one call so that the user may use
the phone for another task, such as to make or receive another call. Network
signaling is employed to request that the remote party stop sending media and
to inform them that they are being held. A configurable local hold reminder
feature can be used to remind the user that they have placed calls on hold. The
call hold reminder is always played through the speakerphone.
Backgrounds <bg/>
Automatic Off-Hook Call Placement
on page A-94.
Configuring Your System
on page A-70.
4 - 17