Polycom SIP 3.0.2 Administrator's Manual page 93

For the feature.2.name = messaging attribute, set
d
feature.2.enabled to 1.
Locate the voIpProt parameter.
e
Set the voIpProt.server.x.transport attribute to TCPpreferred or
TLS.
Your selection depends on the LCS configuration.
The TLS protocol is not supported on SoundPoint IP 300 and 500 phones.
Note
Set the voIpProt.server.x.address to the LCS address.
f
For example, voIpProt.server.1.address = "lcs2005.local"
Set the voIpProt.SIP.lcs attribute to 1.
g
(Optional) If SIP forking is desired, set voIpProt.SIP.ms-forking
h
attribute to 1.
Refer to
Save the modified sip.cfg configuration file.
i
2. Modify the phone1.cfg configuration file as follows:
Open phone1.cfg in an XML editor.
a
Locate the registration parameter.
b
Set the reg.1.address to the LCS address.
c
For example, reg.1.address = "7778"
Set the reg.1.server.y.address to the LCS server name.
d
(Optional) Set the reg.1.server.y.transport attribute to
e
TCPpreferred or TLS.
Your selection depends on the LCS configuration.
Set reg.1.auth.userId to the phone's LCS username.
f
For example, reg.1.auth.userId = "jbloggs"
Set reg.1.auth.password to the LCS password.
g
For example, reg.1.auth.password = "Password2"
Locate the roaming_buddies attribute.
h
Set the roaming_buddies.reg element to 1.
i
Refer to
Locate the roaming_privacy attribute.
j
Set the roaming_privacy.reg element to 1.
k
Refer to
SIP <SIP/> on page A-10.
Roaming Buddies <roaming_buddies/>
Roaming Privacy <roaming_privacy/>
Configuring Your System
on page A-104.
on page A-104.
4 - 45