Upgrading Sip Application - Polycom SIP 3.0.2 Administrator's Manual

Note

Upgrading SIP Application

4. Reboot the phones by pressing the reboot multiple key combination.
For more information, refer to
The bootROM and SIP application modify the APPLICATION
APP_FILE_PATH attribute of the <Ethernet address>.cfg files so that it
references the appropriate sip.ld files.
For example, the reference to sip.ld is changed to 2345-11605-001.sip.ld to
boot the SoundPoint IP 601 image.
At this point , the phone sends a DHCP Discover packet to the DHCP server. This
is found in the Bootstrap Protocol/option "Vendor Class Identifier" section of the
packet and includes the phone's part number and the bootROM version.
For example, a SoundPoint IP 650 might send the following information:
5EL@
DC?5cSc52*46*(9N7*<u6=pPolycomSoundPointIP-SPIP_6502345-12600-001,1B
R/4.0.0.0155/23-May-07 13:35BR/4.0.0.0155/23-May-07 13:35
For more information, refer to
5. Monitor the boot server event log and the uploaded event log files (if
permitted).
Ensure that the configuration process completed correctly. All
configuration files used by the boot server are logged.
You can now instruct your users to start making calls.
You can upgrade the SIP application that is running on the SoundPoint IP and
SoundStation IP phones in your organization. The exact steps that you
perform are dependent on the version of the SIP application that is currently
running on the phones and the version that want to upgrade to.
The bootROM, application executable, and configuration files can be updated
automatically through the centralized provisioning model. These files are
read-only by default.
Most organization can use the instructions shown in the next section,
Supporting SoundPoint IP and SoundStation IP
However, if your organization has a mixture of SoundPoint IP 300 and/or 500
phones deployed along with other models, you will need to change the phone
configuration files to continue to support the SoundPoint IP 300 and IP 500
phones when software releases SIP 2.2.0 or later are deployed. These models
were discontinued as of May 2006. In this case , refer to
SoundPoint IP 300 and 500 Phones
Multiple Key Combinations
Parsing Vendor ID Information
Phones.
on page 3-19.
Setting up Your System
on page C-9.
on page C-17.
Supporting
3 - 17