Zenith TVSC2040F Operating Manual & Warranty page 25

RECORDING
Make sure:
• TVNCR power must be turned on.
• Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the
tape to the point you want to begin recording.)
You can ONLY watch the same TV program
that is being recorded.
1 Select the channel [o be recorded
Press the number buttons on
the remote control or the
CHANNEL UP or DOWN
button.
Remember: If the TV/VCR is
connected to a cable box or
CH 10 /
satellite box, the TV/VCR must be on CH3 or
CH4.
Then the channel to be recorded must be
selected on the cable box or satellite box.
2 Select the tape speed
Press the SPEED button to
select the desired tape
speed (SP/SLP).
SP
Press the PAUSE/STILL button to temporarily
stop recording.
f
PAUSE
Press the PAUSE/STILLor |
REC(ORD) button to resumer
/
recording. J
NOTE: /
• After five minutes, the _ sp
TV/VCR will automatically switch to the
Recording mode to prevent tape damage.
• If "CLOSED CAPTION [ON]" is selected, the
On-Screen Display will appear for 5 seconds,
then disappear.
3
Begin recording f"REC
Press the REC(ORD) button.
SP
4 Stop recording
Press the STOP button when recording is
completed,
- 25 - EN
9Kt6