Zenith TVSC2040F Operating Manual & Warranty page 16

MANUAL CLOCK SETTING
Make sure:
• TVNCR power must be turned on.
In the example below, the clock is to be set to:
DATE May 1st, 2000
SETTING TIME 5:40PM
1 Select "SETTING CLOCK"
Press the MENU button on [ M E. u
the remote control. .,ME. _ .os_.a
p_CTtJRE CONTROL
Press the PLAY or STOP . SE_,_C_OCK
CHANNEL SET UP
button to point to "SETTING VUSER'S SEt UPCR,p S_'UP
LANGUAGE ENGLISH]
CLOCK". c_Tio, lOaF1
ZERO RETURN
Then, press the F.FWD T,M_S_A.CH
INDEX _EARCH
button.
2 Select "MANUAL CLOCK SET"
Press the PLAY or STOP - SE_,NG CLOCK-
button to point to "MANUAL A_.oc_oc_ io.i
CLOCK SET". AUTOCLOCKC. IAUTOI
Then, press the F.FWD .. MANUAL CLOCK SET
button, os_ iota
3
Select the month
Press the PLAY or STOP
button until your desired
month appears.
(Example: May --> 05)
Then, press the F.FWD
button,
. MANUAL CLOd3K SET -
M=QN_r H 0#,y yF.AR
t4GUR MtNUTE
4
Select the day
Press the PLAY or STOP
button until your desired day
appears.
(Example: 1st --_ 01 )
Then, press the F.FWD
button.
%
- MANUAL CLO_K SET - |
osi -_JC "
,.,,, ,,,
5 Select the year
Press the PLAY or STOP -M.NUALC_OCKS_T- |
button until your desired year] '_ r,_ _._
appears. I °.L_. _ _oN 2ooo
(Example: 2000)
Then, press the F.FWD
button,
6 Select the hour
Press the PLAY or STOP
button unti_ your desired hour
appears.
(Example: 5, PM)
Then, press the EFWD
button.
MANUALCLOCK SET l
MONTH DAY YEAR
05 / 01 MON 200O
POUR MrNUTE
O5 PM
7 Select the minute
Press the PLAY or STOP
button until the desired
minute appears.
(Example: 40)
- MANUAL CLOCK SET -
MONTH DAY yEAR
05 / 01 MON 2000
HOUR MrNUTE
05 : 40PM
8 Start the c{ock
Press the MENU button on
the remote control,
Althoughseconds are not s:.o Pu]
displayed, they begin
J
counting from O0 when you
press the MENU button on
the remote control. Use this feature to
synchronizethe clock with the correcttime.
NOTE: When unplugging the AC cord or if there
is a power failure for more than 30 seconds, you
may have 10 reset the clock,
TO CHANGE CLOCK SETTING
If you want to change the clock,
1) Follow steps [1] and [2].
2) Select where you want to change using the
F.FWD or REW button.
3) Enter correct numbers using the PLAY or
STOP button.
4) Press the MENU button on the remote control
to start the clock.
NOTE:
If there is no local PBS station in your area or on
your cable system, select "AUTO CLOCK" and
press the F.FWD or REW button to turn [OFF] this
function. Then you can manually adjust the clock.
- 16- EN
9K16