Zenith TVSC2040F Operating Manual & Warranty page 24

This feature provides a method of indexing the
starting point so that it can be easily returned to
in either fast forward or rewind mode.
• The index mark will be made automatically
when the REC button is pressed. It will also be
marked at the starting point of "lqmer recording
and OTR.
• The index mark will not be recorded if the
PAUSE/STILL button is pressed and released
during recording.
• The time gap between making the index marks
on the tape should be greater than 1 minute for
SP recording, 2 minutes for LP recording and 3
minutes for SLP recording.
Example: You are watching program number 4
and want to fast forward to program number 7.
You must skip three programs.
CURRENT PLAYBACK PROGRAM
Beginning of tape $ End of tape
I P o.11 Pro2 I P o3 _,_ P o51 Pro61 Pro7 I
_'4 3 2 1 1 2 3
INDEX MARK
3 Begin Index Search
Press the REW or F.FWD button. The TV/VCR
begins rewinding or fast forwarding to the
beginning of desired program.
NOTE: Every time an index signal is skipped, the
number in the program indicator decreases by
one.
4 After Index Search
When the preset program is reached, the
TV/VCR will start playback automatically.
• A video cassette must be inserted in the
"rv/vcR for this function to work.
• The number of Index Searches can be set up
to 20.
• This function will not operate in the recording
mode.
• When you want to cancel the Index Search
while in progress, press the STOP button.
'1 Select "INDEX SEARCH _
Press the MENU button on the
remote control.
Press the PLAY or STOP
button to point to "INDEX
SEARCH". Then, press the
F.FWD button
-MENU-
TIM R pR MING
HANN UP
V_HIP S UP
APT N OF
/ _
2 Enter your desired number
button until the number of
programs that you want to skip
appears.
(Example: "03" for 3 programs)
• The Index Search mode will
be canceled if the procedures are not activated
in 30 seconds.
- 24 - EN
9K16