Rear View - Zenith TVSC2040F Operating Manual & Warranty

8 REC(ORD)(rec) button-.
Press for manual recording.
OTR button- Activates One Touch Recording.
(Only on the TVNCR)
9 RECORD indicator-
Flashes during recording.
Lights up in the Stand-by mode for 33mer
Recording.
10 Remote Sensor Window-
Receives the infrared signals from the remote
control.
11 CHANNEL(oh) UP/DOWN buttons-
Press to select the desired channels for
viewing or recording.
TRACKING function- Press to minimize video
'noise' (lines or dots off screen) during
playback mode.
12 VOLUME(vol)+/-(UP/DOWN) buttons-
Adjust the volume level.
13 PWR(power) button-
Press to turn TVNCR on and off. Press to
activate timer recording.
14 Cassette slot-
Insert the cassette here.
15 Number buttons-
Press to select desired channels for viewing or
recording. To select channels from 1 to 9, first
press the 0 button and then 1 to 9.
100+ button- When selecting cable channels
which are higher than 99, press this button
first, then press the last two digits, (To select
channel 125, first press the "100+" button then
press "2" and "5").
16 MENU button-
Press to display the main menu on the "IV
screen.
17 DISPLAY button-
Display the counter or the current channel
number and current time on the TV screen.
18 SPEED button-
Press to choose the desired recording speed:
SP/SLP.
19 T-PROG. CLEAR button-
Press to cancel a timer program setting.
(See page 29.)
COUNTER RESET button- Press to reset
counter to 0:00:00.
20 GAME button-
Sets the game mode and external input mode
at the same time.
21 SLOW button-
Press to start slow motion playback. The slew
speed can be controlled by pressing the F,FWD
button (faster) or the nEW button (slower).
(only on the remote control).
22 PAUSE/STILL button-
Press to temporarily stop the tape during the
recording or to view a still picture during
playback.
23 MUTE button-
Mutes the sound. Press it again to resume
sound.
24 CHANNEL RETURN button-
Press to go back to the previously viewed
channel. For example, pressing this button
once will change channel display from 3
(present channel) to 10 (previously viewed
channel), and pressing it a second time will
return from 10 to 3.
25 WAKE UP/SLEEP button-
Sets the Wake up or Sleep Timer.
26 Power cord-
Connect to a standard AC outlet (120V/60Hz).
27 ANT. terminal-
Connect to an antenna or cable system.
- REAR VIEW -
oooooooooooo ooooooooooooo0 oooooo
o o ol I1
I ,,,, o,u,, ,, !
26 27
-10-
1 I
EN
9K16