PART iDENTiFiCATiON
CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST near the end of this manual. IMPORTANT: If you cannot
find a part in the hardware
kit, check to see if it has been preassembled.
If a part is missing,
please call
1=877-992=5999. To avoid damaging
parts, do not use power tools for assembly.
6.35mm
Spacer (94)
12.7mm
Spacer (73)
14.8mm
Spacer (95)
]
M10 Washer (88)
M6 Locknut (87)
M10 Jam Nut (99)
M10 Locknut (74)
M10 Curved
Washer (86)
Continued on page 6