18. Apply grease to an M10 x 130mm Bolt (11).
Identify the Left and Right Press Arms (17, 18)
and orient them as shown.
Insert the Press Arm Spacer (42) between the
Left and Right Press Arms (17, 18) as shown.
Attach the Left and Right Press Arms (17, 18) to
the Base (1) with the M10 x 130mm Bolt (11)
and an M10 Locknut (74). Do not overtighten
the Locknut; the Press Arms must pivot eas=
ily.
Attach the Left and Right Press Arms (17, 18)
with two M10 x 20mm Screws (84), two M10
Washers (88), and the Press Arm Spacer (42).
84
88
Grease
88
11
84
17
19. Identify the Butterfly Frame (7), the Left
Butterfly Pulley Bracket (20), and the Left
Butterfly Arm (15) and orient them as shown.
Apply grease to an M10 x 130mm Bolt (11).
Attach the Left Butterfly Arm (15) to the Butterfly
Frame (7) with the M10 x 130mm Bolt (11), an
Upper Butterfly Bushing (52), the Left Butterfly
Pulley Bracket (20), and an M10 Locknut (74),
Do not overtighten
the Locknut; the Butterfly
Arm must pivot easily.
Repeat this step to attach the Right Butterfly
Arm (16) and the Right Butterfly
Pulley
Bracket
(21).
19
21
15