Lanier LD225 Function Manual page 104

Troubleshooting
Message
Selected file is currently in use.
Cannot change password.
Selected file is currently in use.
Cannot change user name.
Selected file is currently in use.
Cannot delete it.
Sender's name is not selected. Please
specify sender's name.
Sending the data has failed. The data
will be resent later.
Sending the data has failed. To con-
8
firm the result, check [Scanned Files
Status].
The destination list has been updated.
Specified destination(s) or sender's
name has been cleared.
The E-mail address entered is not cor-
rect. Please re-enter.
The entered path is not correct.
Please re-enter.
96
Causes and solutions
You cannot delete the password of a
file whose status is "Waiting..." or
that is being edited with DeskTop-
Binder. Delete the password after
canceling delivery or completing ed-
iting.
You cannot change the user name
for a file whose status is "Waiting..."
or that is being edited with Desk-
TopBinder. Change the user name
after canceling delivery or complet-
ing editing.
You cannot delete a file whose status
is "Waiting..." or that is being edited
with DeskTopBinder. Delete the file
after canceling delivery or complet-
ing editing.
A sender's name should be specified
before sending e-mail. Send e-mail
after specifying the sender's name.
A network error has occurred and a
file was not sent correctly. Wait until
sending is retried automatically af-
ter the preset interval. If sending
fails again, consult the network ad-
ministrator.
While a file was being sent, a net-
work error occurred and the file
could not be sent correctly. Try the
operation once more.
If the message is still shown, the net-
work may be crowded. Consult the
network administrator.
If multiple files were sent, use the
Scanned Files Status screen to check
for which file the problem occurred.
See p.29 "Checking the E-mail Re-
sults", p.45 "Checking the Scan to
Folder Results", or p.71 "Checking
the Status of Delivery".
A specified destination or sender's
name was cleared when the destina-
tion list in the delivery server was
updated. Specify the destination or
sender's name again.
Make sure the e-mail address is cor-
rect, and then enter it again.
Confirm the destination computer
and the path, and then enter it again.