Destination List Settings; Send Settings - Lanier LD225 Function Manual

Initial Scanner Setup

Destination List Settings

Select the defaults for the titles and
the display priority for the destina-
tion list in the machine and the deliv-
ery server.
❖ Destination List Display Priority 1
Select a destination list to be dis-
played when the machine is in the
initial state. You can select either
[E-mail / Folder] or [Delivery Server].
❖ Destination List Display Priority 2
In the machine's address book, se-
lect which address book appears
by default.
You can select either [E-mail Ad-
dress] or [Folder].
❖ Select Title
Select the titles for destinations
and group destinations of e-mail
and Scan to Folder. Selected titles
appear in the e-mail and Scan to
Folder destination list to be used
for searching for destinations. Se-
lect [Title 1] (ten titles), [Title 2] (ten
titles), or [Title 3] (five titles).
❖ Update Delivery Server Destination
9
List
To update the delivery server des-
tination list, press [Update Delivery
Server Destination List].
Normally, the delivery server des-
tination list is automatically updat-
ed. This function allows manual
updating at any time.
110

Send Settings

This section explains how to set the
defaults for settings such as the com-
pression level for the scan file and
switching to and from the network
TWAIN scanner function.
The settings consist of the following.
For the table about settings and de-
faults, see p.101 "Scanner Features".
❖ TWAIN Standby Time
When the machine is being used to
send e-mail or a file, or functioning
as Document Server or a network
delivery scanner, a scanning re-
quest to the machine as a TWAIN
scanner will switch the machine to
the network TWAIN scanner func-
tion. This setting determines the
delay until the machine switches to
the network TWAIN scanner func-
tion.
• When [Off] is selected, the ma-
chine will switch to the network
TWAIN scanner function at
once.
• When [On] is selected, you can
enter the delay time with the
number keys (3-30 seconds).
The machine will switch to the
network TWAIN scanner func-
tion when the time set here
passes after the last key opera-
tion.
❖ File Type Priority
Select whether to send the scanned
originals as single-page files or a
multiple-page file.
For single-page files, select either
TIFF/JPEG or PDF. For multi-page
files, select either TIFF or PDF.
Note
❒ You cannot select multi-page
TIFF format for an image stored
in JPEG format.