Table of Contents
Advertisement
6) Select t he
desired fan speed by pressing
the FAN button.
NOTE:
During
hot days, the unit will cool the room most efficiently
by setting the temperature
at the lowest
setting and the fan speed on high. Reducing
the length of the exhaust
duct, insulating
the exhaust
hose and
window
kit, and keeping
direct sunlight
to a minimum
will also improve
the cooling
efficiency.
Dehumidifier
Mode
1) Install the exhaust
hoses and window
kit properly
(see pages 6 & 7).
2)
Plug the Power
Cord into an electrical
outlet.
3)
Turn on the unit by pressing
the POWER
Button
on the control
panel.
4)
Press the MODE
button until the"
_
"appears
on the control
panel display.
NOTE:
The unit operates
at low fan speed during
dehumidifier
mode.
The unit cools room slightly
during
the dehumidification.
Keep the windows
and doors closed to aid the effectiveness
of the unit in removing
the
moisture
from the room.
NOTE:
The unit will not perform
in dehumidifier
mode when the room temperature
is lower than 61°F.
Fan Mode
1) Plug the Power Cord into an electrical
outlet.
2)
Turn on the unit by pressing
the POWER
button
on the control
panel.
3)
Press the MODE
button
until the"
_
" icon appears
on the control
panel display.
4)
Select the fan speed by pressing
the FAN button.
5)
To circulate
more air, press the SWING
button
on the remote control.
The louvers will oscillate
in our
exclusive
WAVEFLO®
pattern;
back and forth and up and down, spreading
more air throughout
the
room.
NOTE:
It is not necessary
for the exhaust
hoses and window
kit to be installed
to operate
the unit in fan mode.
Heatinq
Mode
1) Plug the Power Cord into an electrical
outlet.
2)
Turn on the unit by pressing
the POWER
button on the control
panel.
3)
Press the MODE
button until the ....
icon appears
on the control
panel display.
4)
Press the Tor
•
buttons
until the desiredroom
temperature
appears
on the control
panel display.
The
temperature
ranges
from 61 F - 88 F (16 C - 31 C).
5)
Select the fan speed by pressing
the FAN button.
It is recommended
to set the fan speed to low.
Auto Mode
1) Install the exhaust
hoses and window
kit properly
(see pages 6 & 7).
2) Plug the Power
Cord into an electrical
outlet.
3)
Turn on the unit by pressing
the POWER
button on the control
panel.
4)
Press the MODE
button until the"
_ _ " icon appears
on the control
panel display.
Select the fan speed
by pressing
the FAN button.
Hide quick links:
Advertisement
Table of Contents
