Magnavox VR3440 Owner's Manual page 7

2
Set the CH3/CH4 switch on the back of the VCR to channel 3
or 4. To operate the VCR with your TV, set your TV to the
same channel. For example, if your switch is set to channel 3
(CH 3), turn your TV to channel 3.
To avoid local interference, the CH3/CH4 switch position you
choose should correspond to the local TV channel that is not
used or least used.
"IV
Back of VCR
CHANNEl_
314 Switch
CH 3
[]
AC Outlet
7
Now, play a tape to see if you have made the right connections.
Make sure...
the batteries are loaded in the remote control and the connections on
pages 6 and 7 have been completed before continuing to the steps below.
TV
r,._[1L_ I|Ti
(_ urn the TV on. Set the "IVto the same channel as the switch
on the back of the VCR (CH3/CH4).
VCR
----Turn TV on.
1.,II llL_ irllm
Insert a cassette.*
• The VCR (Video Cassette Recorder) Power will come on.
(_ Press the PLAY button.
• The VCR mode is automatically set.
"VCR" Indicator will light.
I¢toI !!1"-,1 g|v| !BIll ,'1
Press the STOP/EJECT button to stop playback.
• Press the REWIND button to fully rewind the tape.
• Press the STOP/EJECT button again to remove the.tape.
* startIf theautomatically.record tab on a cassette (page 5) is removed, playback will
e If a cassette is already in the VCR, just press the POWER button.
Now turn to the next page _d place local channels in the
VCR. This puts the VCR in the "NORMAL TV" or "CABLE
TV" mode and places channels in the VCR's memory.
"x
Insert
cassette
tape.
VCR indicator
CD 0 C)
Remote Control
To start,
press
PLAY
Button.
I
To stop,
press
STOP/
EJECTor
STOP
Button.