Table of Contents
Advertisement
• "
13
RemoteControl T ransmitter
THE TV CONTROLS ARE SET TO OPERATE MANY, BUT NOT ALL TVS. PUSH THE
'q'V CONTROL"
BUTTONS TO SEE IF THEY OPERATE YOUR REMOTE CONTROL TV.
--IH m/
MUTE
Button
TV CHANNEL
UP/DOWN
Button
Press to instantly reduce the TV's sound level. Press again
Press"
A,, or "v"
to scan up or down through the TV
to return to previous volume setting.
_
channels. Release at desired channel.
\
\
TV POWER
Button
'__
,\
VOLUME
UP/DOWN
Button
_
_--
Press"--
""or ","
to increase or decrease the TV's sound__
"_"'""'''------_
_
M°rE _?" P°wE"
volume
PLAY Button
-'1"1
• Press to play back a tape.
_
/_
• Press to release the Slow, or Search mode and return to
.........
_ _ ) FFtS_RCN
playback.
_
_
REW_nde)w/SEAthRCHBUh_grspeed
You can also press this _
"_
button in the Play mode for rapid reverse visual search.
FRAME ADVANCE Button
Press this button while in the Still mode to advance the
picture one frame at a time (Frame Advance).
NUMBERED
Buttons
(0, 1, 2, 3, 4, 5, 6, 7, 8 and9)
To use in channel selection, menu selection, clock setting,
program setting, etc. For selecting channels 1 to 9, first press
"0" button and then press "1" to "9."
(loo)
Press this button first to select the channel 100 and more.
SLOWNAR(iable)
SLOW Buttons
First press the SLOW button during SP or SLP playback to
view a slow-motion
picture. The speed can be varied from
about 1/6 to about 1/30 of normal speed with the VAR(iable)
SLOW button.
SLOW
STATUS
CLEAR
CD
MAGNAVOX
RECORDButton
Press to start recording.
GO-TO
Button
Press 1o search for desired point on linear tape counter.
Press this button and select desired counter number with
NUMBERED
buttons.
STATUS Button
Press to recall the VCR
status display
(see page 18).
ONETOUCHRECORDING(OTR) Button
Select the channel and press this button to start recording
immediately for 30 minutes periods to the tape ends. In any
case, power shuts off automatically.
Advertisement
Table of Contents
