Remote Control - Magnavox VR3440 Owner's Manual

31
--Remote Control
VCR can't be remote controlled...
-Miscellaneous
You can't view programs normally on TV...
Video cassette can't be inserted...
Video cassette can't be removed...
Video cassette ejects when the OTR, RECORD and
PLAY buttons are pressed or the POWER button is
pressed off to set the Timer...
In the Stop mode, the motor(CYLINDER) continues to
rotate ....
If you cannot receive channels above 13....
Correction
oAim the Remote Control directly at the remote sensor on
the VCR.
oAvoid all obstacles which may interfere with the signal
path.
Olnspect or replace the batteries (P.5).
Correction
oSet the VCR/TV selector to "TV" (P.9).
olnsert the cassette with the window side up and the record
tab facing you.
• Check that the power plug is completely connected to an
AC outlet.
OCheck the cassette to be sure that the record tab on the
back of the cassette is still intact (P.5).
• To enable quick play mechanism the cylinder will rotate
for about 10 minutes.
• Repeat "Placing Local Channels in VCR" on page 8,
making sure you select "CABLE TV" in step 2.
Sae.r, iliemia
Video Recording System
Video Signal
Antenna
VHF Output Signal
Power Requirement
Power Consumption
Operating Temperature
Relative Humidity
Rotary four-head helical scan
system
EIA standards: NTSC color
VHF/UHF- 75 ohm external
antenna terminal
Channel 3 or 4 (switchable)
75 ohms unbalanced
120 V _ AC/60 Hz
19W
41 ° F(5 ° C) to 104 * F(40 *C)
10% to 80%
Weight
Dimensions
Tuner
Broadcast Channels
CATV Channels
9.5 lbs. (4.3 kg)
14-3116"(W) x 3-9/16"(H) x 12"(D)
(360 mm × 89 mm x 304 nun)
VHF 2 - 13, UHF 14 - 69
Midband A - I
Superband J - W
Hyperband A-5 - A- 1
Special channel 5A
Ultraband 65 - 94
Design and specifications are subject to change without notice.