Magnavox VR3440 Owner's Manual page 29

29
If your cable system uses a converter box you may use this connection instead of the basic cable connection shown on the
previous page.
In from Antenna
CAIV Input
Outto TV
CableTV
Converter Box
With this connection you can 1) program unattended recording of more than one unscrambled channel 2) view one channel
while recording another.
NOTE: oUse the VCR CHANNEL UP/DOWN button to select a channel to be recorded.
eYou cannot record scrambled channels with this connection.
To Record One Channel While Viewing Another
1. Select the channel to be recorded with the VCR CHANNEL UP/DOWN button.
2. On the VCR set the VCR/TV selector to "TV".
3. Set the channel selector on the TV to the output channel of the Converter Box.
4. Select the channel to be viewed on the Converter Box.
To Play Back a Tape
1. Set the VCR/TV selector to "VCR."
2. Set the TV channel selector to the output channel of the Converter Box.
3. Set the Converter Box channel selector to the VCR output channel (channel 3 or 4).
Backof TV (example only)
II]1] ;ii_l+'t(:-i |g[,I ill l [_lq.llllal,'!
Video (yellow) and
Audio (white) out Jacks
Audio Cable
Video Cable(yellowtips)
For any additional adjustments you may need to make to your TV, please refer to your TV owner's manual.
Cables not included.