Table of Contents
Advertisement
Timer R ecording
(cont'd) 3 5
..°°
°°
°.
°
°.
•
.
°...
•
°
.
Checking
or ClearingTimer
Recordings
I
With
the TVIVCR
on, press the MENU
button.
2
Press the _LAYI&
button
or the STOP/Y
button
to select
VCR PROGRAM,
then press the F.FWD/I_
button.
3
Press the PLAY/.
button
or the S'I-OP/V
button
to select
PROGRAM
REVIEW,
then press the F.FWD/I_
button.
The
timer recording
information
for the program in the lowest num-
bered position
will appear on the screen. If no timer recordings
are programmed,
nothing will happen when you select PROGRAM
REVIEW and press the EFWD/I_
button.
4
Press the F.FWD/I_
button
to display information
about
the next programmed
timer
recording.
(If you do not press
a button within 10 seconds, information
about the next pro-
grammed timer recording
will appear.)This will continue until all
positions have been displayed.Thee, the menu will disappear.You
can exit the Program Review at any time by pressing the STA-
TUS/EXIT button.
5
To cancel the timer recording
displayed, press the CLEAR
button. Either the display will disappearor informationabout
other timer recordings will appear.If you do not press any other
buttons, the display will disappear after all timer recordings have
been displayed.
6
Repeat steps I - 4 to make sure you have cleared the cor-
rect position.
I
__
2-4
CS3 O
0
00
5
With ShawGuard, you don't have to
worry about losing your timer
recordings, If the power fails, pro-
grammed timer recordings will be
restored when the clock is reset.
(The clock will reset itself automati-
cally if you are using the AUTO
CLOCK feature. Details are on
pages 14-17. If you are not using
the AUTO CLOCK feature, reset the
clock manually. Details are on pages
12-13.) The timer recording will not
occur only if the timer recording was
scheduled to take place during the
power failure.
Advertisement
Table of Contents
