Hooking Up The Tv/Vcr - Philips CCB252AT Owner's Manual

6 H00king U ptheTV/VCR
I
Hook up your I"V/VCR using one of the connections shown.
A Connect a Cable signal
• or an antennato the
Hooking Up Your TV/VCR ANT(enna) Jack.
With a Cable Signal or
Outdoor Antenna
Be
Hooking Up Your TV/VCR
With a Cable Box
To view any channel,set the TV/VCR
to the Cable Box output channel
(channel03 or 04).Then, selectchan-
nels at the Cable Box.
Connect the Cable signalto /
the IN Jack on the Cable Box.
Connect an RF coaxial cable (75-
ohm, not supplied) to the OUT Jack
on the Cable Box and to the
ANT(enna) Jack on the'I'V/VCR,
I RF coaxial cable
(not supplied)
Ce
Hooking Up Your'rV/VC R
With an IndoorAntenna
To installa rod antenna (not sup-
plied),pushthe stem of the antenna
into the antennahole on the top of
the "I'VNCR. Connect the antenna
wire to the ANT(enna) Jackon the
back of the TV/VCR as shown.
Extend the antennaand adjust its
length,direction,and anglefor the
clearest picture.
Rod Antenna
(not supplied)
ANT.
©