Blue Background - Philips CCB252AT Owner's Manual

46 Blue Background
If you want the'IV screen to be solid blue when a weak signal is
received, set BLUE BACKGROUND to ON.The screen will be
blue and the sound will be muted. Or, if you want to receive the
weak signal,set BLUE BACKGROUND to OFEWhen you select a
channel that is receiving a weak signal,you will see and hear the
static in the TV programming.
To set BLUE BACKGROUND to ON or OFF,follow the steps
below.
I
Press the MENU button.
;_ PP, i M
SETUP i _r PRESS _
VCR PROGRAM •
! VCR SETUP
i CAPTION
_ REMINDER
2
Press the PLAY/A button or the STOP/v button to select
VCR SETUP,
then press the E.FWD_ button.
f VCR SETUP _'_
REPEAT PLAy
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND {ON]
SELECT At CHOOSE •
_TO END PRESS EXIT
3
I
Press the PLAY/h, button or the STOPIv button to select
BLUE BACKGROUND.Then, press the F.FWD_ button
repeatedly so that OFF (or ON) appears beside BLUE BACK-
GROUND.
ONE TIME PLAY [ON]
REPEAT pLAY
ON-SCREEN MODE
• DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
SELECT AV CHOOSE •
O END PRESSEXIT
4
Press the STATUS/EXIT button.
Helpful Hint
• A blue screen may appear briefly
between channel changes if BLUE
BACKGROUND is set to ON.To
avoid having the briet" blue screen,
set BLUE BACKGROUND to OFF.