Table of Contents
Advertisement
30 One.Touch R ecording
The One-Touch Recording (OTR) function allowsyou to programan
immediate timed recording from 30 minutes to eighthours long
without setting the timer.
Beforeyou begin,make sure:
• Channels are set up.
• There is a tape in the'l'V/VCR.The record tab must be intact.
Press the STOP/EJECT button
on the TV/VCR to stop the
OTR.
I
Use the CH(annel)
_/_7
button or the Number
buttons to
select the channel you want to record.
2
Press the SPEED button until the desired recording speed
(SP or SLP) appears on the screen. Detailsare on page 29
3
Pres_ the REC(ord)/OTR
button repeatedly untilthe desired
recording lengthappears in the upper right corner of the screen.
Recording will begin immediately.The REC(ord) light will appear.
CHI2OITAR
LENGTH 0:301
LENGTH
:
PRESSOTR
NCEL
PRESSCLEAR
4
To stop an OTR before recording
is finished, press the
STOP/EJECT button on theTV/VCR.
Or, press the REC(ord)/OTR
button, then press the CLEAR
button, then press the STOP/Y button on the remote con-
trel.
C)
0
lID
CZ]0
1!3 IZ] Ii]
I
_
O
_QL
Helpful Hints
To check the time remaining for an
OTR after the OTR has been set,
press the STATUS/EXIT button.
To change the recording length while
an OTR is in progress, press the
REC(ord)/OTR button until the
desired recording length appears on
the screen.
Youcan not pause an OTR.
To cancel an OTR but continue
recording, press the REC(ord)/OTR
button, then press the CLEAR but-
ton.
You cannot record if DEFEAT
RECORDING is set to ON. Details
are on page 36.
Youcan change the tape speed with
the SPEED button while a recording
is in progress, but some distortian
may appear on the tape.
Advertisement
Table of Contents
