Programmed Recording (Timer); Vps' (Video Programming System) And 'Pdc' (Programme Delivery Control); Programming A Recording (With 'Video Plus+') - Philips 14PV211 Manual

7.

PROGRAMMED RECORDING (TIMER)

Use programmed recording to automatically start and stop a
recording at a later date.
To make a programmed recording, your TV-VIDEO Combi
needs to know:
* the date you want to make the recording;
* the programme number for the TV channel you want to
record;
* the start and stop time of the recording;
* whether you want to use VPS or PDC;
* the recording speed (SP/LP).
The TV-VIDEO Combi stores all the information in a TIMER
block. You can programme up to 6 TIMER blocks a month in
advance.
'VPS' (Video Programming System) and
'PDC' (Programme Delivery Control)
With 'VPS and PDC', the TV station controls the start time and
the length of the recording. This means that the TV-VIDEO
Combi switches itself on and off at the right time even if a TV
programme you want to record begins earlier or finishes later
than expected.
Usually the start time is the same as the VPS or PDC time. But
if your TV guide gives a VPS or PDC time which is different to
the programme's start time (for example, 20.15 and VPS 20.14),
you must enter '20.14' as the start time.
If you want to programme a time that is different from the VPS
or PDC time, you must switch off VPS or PDC.
Programming a recording
(with 'VIDEO Plus+')
All the information required for a programming is contained in
the PlusCode programming number.
a
Press the button on the remote control.
TIMER s
b
Select the line '
VIDEOPlus
AP q button and confirm with the
' with the BP r or
SqC button.
c
Enter the entire PlusCode programming number (up to 9
digits) printed in your TV guide next to the start time of a
TV programme.
For example, 5-234-89 or 5 234 89
Enter 523489 for the PlusCode programming number.
If you make a mistake, you can clear your instructions
with the button.
CLEAR
VideoPlus
CODE
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1 2 3 4 5 6( ( (
0-9
d
In line ' ' select the kind of programming
REPEAT
required with the BP r
' ': recording only once
ONCE
' ': recordings every day from Monday to Friday.
Mo-Fr
' ': recordings every day from Monday to Sunday.
Mo-Su
' ': recordings every week on the same day of
WEEKLY
the week.
e
Confirm with the button. Your programming details
OK
will then appear on the TV screen.
TIMER PROGRAMMING
DATE PROG. START END
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx 15:36 15:50 -
ã è
«
D If VIDEO Plus+ does not recognise the TV channel,
' ' will appear on the TV screen. Instead of
P??
' ', you can select the programme number you
P??
want with the number buttons
D If '
Code error
means you entered an incorrect PlusCode number
or the incorrect date. Correct your instructions or
end with the
TIMER s
D If '
Daily error
date was incorrectly entered.
REPEAT
ONCE
Store:
press OK
or AP q button.
VPS
LP PDC REP.
* ONCE
Store:
press OK
.
0-9
' appears on the TV screen, this
button.
' appears on the TV screen, the
17