Table of Contents
Advertisement
AUDIO andVlDEO OUT Jackson source unit
(VCR or Camcorder)
°
!
IT _
"
Audio Cable (white)from
-
-
J
AUDIO OUT to AUDIO
_1_.
_=
Video Cable (yellow) from
VIDEO OUT to VIDEO
AUDIO andVIDEO
Jacks on TVNCR
I
Make the connections shown above, using audio and video
cables_Connect the source unit (VCR or camcorder) to a
power source after connections are made.
2
The source unit will play your tape. Insert a prerecorded tape in
the source unit. If playbackbegins,press the STOP button on the
unit.
3
TheTV/VCR
will record your tape. Insert
a blank tape in the
"rv/vcR.
Make sure the tape's record tab is intactTheTV/VCR
power will turn on automatically.
4
Point theTV/VCR
remote control at theTV/VCR.
Press
Number buttons 0, 0 so that AJV IN appears on the screen.
5
Point the'rV/VCR
remote control at the TV/VCR. Press the
SPEED button until the desired tape speed (SP or SLP)
appears on the screen.
6
Press the PLAY button on the source unit and the
REC(ord)IOTR
button on yourTV/VCR
at the same time.
Copying will begin.
7
To stop copying, press the STOP/EJECT
button on the
TV/VCR,
then stop the tape on the source unit (VCR
or
camcorder).
Unauthorized recording of copy-
righted television programs, video
tapes, or other materials may
infringe on the rights of copyright
owners and violate copyright laws.
Different brands of equipment may
operate differently.
Make sure all connections are
secure. Otherwise, you may not
record both picture and sound.
Audio and video cables are not
included.
Advertisement
Table of Contents
