Philips CCB252AT Owner's Manual page 12

There are three ways to set the clock: Manually, with Automatic
PBS Channel Selection, or with Manual PBS Channel Selection.
With manual clock setting, you tell the TV/VCR the current time.
With Automatic or Manual PBS Channel Selection, the TV/VCR
gets the time from your local PBS station.
If you use either Manual PBS Channel Selection or Automatic PBS
Channel Selection, follow the steps on page 19 to have the
TV/VCR maintain the clock according to yourTime Zone.
Cable Box users must set the clock manually.
To set the clock manually, follow the steps on pages 12-13.To set
the clock using Automatic PBS Channel Selection, follow the steps
on pages 14-15.To set the clock using Manual PBS Channel
Selection, follow the steps on pages 16-17.
Before you begin, make sure:
The TV/VCR is hooked up and turned on.
Channels are set up.
You make each entry within 60 seconds of the previous entry.
Manual Clock Setting
I
Press the MENU button.
• PRi_SETUP ] PRES 1
_R CR PROGRAM
VCR SETUP
CAPTLON
EMINDER
BRIGHTNESS
2
Press the PLAY/& button or the STOPIY button to select
PRIM. SETUP. Then, press the F.FWD_ button.
• SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR {ON]
SET CLOCK
SELECT &V CHOOSE •
O END PRESS EXIT
3
Press the PLAY/A button or the $TOPI¥ button to select
SET CLOCK.Then, press the F.FWD/I_ button.
SET CLOCK
• AUTO CLOCK [ON]
SET MANUAL CLOCK
DAYLIGHT SVG TIME [ON]
SET TLME :ZONE
[AUTO]
TO CONTINUE PRESS MENU
SELECT &Y CHOOSE I_-
TO END PRESS EXIT
,espr.I ,int.
Entries that do not match the
TV/VCR's calendar will cause a
question mark (?) to appear on the
screen.
To make corrections while you are
setting the clock, press the CLEAR
button until the space for the num-
ber you want to correct is flashing.
Then enter the correct number.