Recording While You Are Away - Sears LXI series 580.55154490 Owner's Manual

RECORDING WHILE YOU ARE AWAY (You can use
Programmable Timer or VCR Plus+)
Be sure that the clock is set to the correct time.
(Refer to "CLOCK SETTING" on page 28.)
1. Insert the cassette.
NOTE: Before starting check that the erase
prevention tab is not missing. If it is removed,
recording will not start.
3. Press "POWER" ON/OFF button to OFF. The
TIMER indication " (_) " will appear on the
Display.
NOTES:
• If the erase prevention tab is removed, the
cassette is ejected automatically and the
" _-$ " indication will flash. Stick a piece of
cellophane tape over the erase prevention hole on
the cassette to enable recording.
• The" _-_ " indication will flash if a cassette is not
inserted.
2. Set the program timer using the MENU button.
Date (on which to recording is to be made) (Refer
to "PROGRAM TIMER SETTING" on pages 38
through 42.) or use VCR Plus+ (on page 43
through 49).
?
4. The recording will start and the " (_ " and the
" RE[ " indications will appear at the time you
have programmed.
NOTES:
1. When the TIMER indication is on, your VCR can
not be operated manually (except POWER
button).
2. If the tape runs out (if the end of the tape is
reached) during timer recording, the mode will
change automatically to STOP, REWIND and
EJECT in this order. At that point, power will
cease to be supplied to prevent the recorded tape
from being overlapped. You can continue timer
recording within programmed time when a new
tape is inserted.
3. If the clock displays " : " it indicates that
there has been a power interruption and the Time
and Programming need to be reset.
4. To stop the VCR during Timer Recording, press
"POWER" ON/OFF button OFF.
- 37 -