Stereo Recording/Playback Connections And Operation - Sears LXI series 580.55154490 Owner's Manual

STEREO RECORDING/PLAYBACK CONNECTIONS AND
OPERATION
This VCR is capable of receiving stereo and SAP broadcasts where available-no modification or special
equipment is required. External stereo system or compatible stereo TV is required for stereo playback.
To "VIDEO IN" _
To "AUDIO IN" (L), (R)
I .
To "VIDEO OUT"
• ......... ; StereoSystem _;_;';;i_i,_i_
1511
",-- 1 _o° i * "
1. Connect Antenna, VCR and TV. Refer to
"ANTENNA/VCR CONNECTIONS" and "VCR/TV
CONNECTIONS" on pages 6 and 7.
2. Connect the video cable to "VIDEO OUT" of your
VCR. Connect the other end to "VIDEO IN" of
your IV.
3. Connect the audio cable to "AUDIO OUT" (L), (R)
of your VCR. Connect the other ends to "AUDIO
IN" (L), (R) of your TV. If you have a stereo
system, connect the audio cable to "LINE IN" (L),
(R) of your stereo system.
• Stereo Playback
1. Turn on your stereo system and hold the sound
of TV to minimum,
2. Turn on IV and select Channel 3 or 4 (depending
upon your VCR channel).
3. Insert a cassette and press "PLAY (X2)" button.
Sound will come out in stereo. Adjust volume at
your stereo system.
NOTES:
1. Set the AUDIO MODE display (Hi-Fi/NORMAL)
to Hi-Fi position. Details are on page 23.
2. Set the AUDIO OUTPUT display (STEREO/
LEFT/RIGHT) to STEREO position.
• Stereo Recording
1. Perform steps 1 through 6 of "RECORDING ON
PROGRAM WHILE VIEWING ANOTHER" on
page 51.
NOTE: When the stereo signal is noisy and
interrupted, set the BROADCAST TYPE display
(STEREO/MONO/SAP) to "MONO".
- 54 -