Cable Antenna (Catv) Connections - Sears LXI series 580.55154490 Owner's Manual

CABLE ANTENNA (CATV) CONNECTION5
"Note to CATV system installer: This reminder is provided to call the CATV system instailer's atLention to _Sectlon
820-40 of the National Electric Code which provides guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding system of the building, as close to the point of cable
entry as practical".
Diagram No. 1
This hook-up permits the recording of cable
channels except for scrambled channels. At the
same time, you may watch any cable channel
selected by the cable converter (with A-B Switch in
B position).
Diagram No. 2
To watch the playback picture from the VCR, set the
A-B Switch to the A position.
If you connect your VCR like this, set the A-B switch
to the A position for VCR Plus+programming.
This hook-up permits the recording of any
channel(including scrambled premium channels).
At the same time, you may view any channel except
those that are scrambled. To wew scrambled
channels, put the A-B Switch in the A position. (In
this position, you cannot watch one channel and
record another.) To use this hook-up, you should
have a cable compatible television receiver.
If you connect your VCR like this, set the A-B switch
to the A position for VCR Plus+programming.
NOTES:
1. The 2-Set Coupler and the A-B Switch are not
supplied and should be purchased locally. The
cable converter is normally supplied by the cable
company.
2. There are other possible connections than shown
here. Their use depends upon the type of cable
system you have and on the type of equipment
you wish to connect. Please consult with your
local Sears Store or Service Department.
-8-